10 Year Austin Springs Chloramines Whole House Water Filter System AS-400

Free Shipping

An outstanding high performance four stage whole house/point-of-entry (POE) water filter system designed specifically for the removal of Chloramines from your water.

If your water company uses Chloramines instead of Chlorine as their primary disinfectant, a normal filter system designed to remove chlorine will not be effective. You need a system that is specifically designed to remove chloramines. See below about how to determine what is in your water.

A whole house POE system filters all the water going to all the outlets in your home. This system is third-party tested and certified by NSF to remove 90%+ of Chloramines.

It is also effective at reducing other harmful contaminants such as pesticides, herbicides, rust, sediment, water soluble metals, and industrial solvents. It has a rated capacity of 400,000 gallons for an estimated effective filter life of 4 years.

Click here to view the main tank replacement filter and costs. 

Upgrade to the Professional Installation Kit to receive a 20″ pre-filter, 20″ pre-filter housing (rather than 10″ pre-filter), and brass fittings for PEX bypass allowing filter bypass making filter changes easier and in the unlikely case of water filter issues. 

Made in the USA.

Austin Springs Chloramines Whole House Water Filter Features

• 4 Stage Filter System
• Stage 1 = 10″ Sediment Pre-Filter captures rust, sediment, and silt (replace 2-4 times/year depending on water chemistry and usage).
• Stage 2 = An upgraded Catalytic Carbon filter reduces chloramines, chlorine, and other chemical compounds.
• Stage 3 = An additional larger tank of Catalytic Carbon further reduces chloramines and other chemical contaminants as well as pesticides, herbicides, and industrial solvents.
• Stage 4 = A Final Sub-Micron Post-Filter reduces any remaining sediment and organic particles down to 0.35 microns (replace every 6-12 months depending on usage). 
• Professional Install Kit includes: 20″ pre-filter, 20″ pre-filter housing (rather than 10″ pre-filter), and brass fittings for PEX bypass. Check your pipe dimensions to select the proper size kit – 3/4″ pipes or 1″ pipes. 3/4″ pipes are standard, but larger homes, homes equipped with well water and some homes in CA use 1″ piping.
• Dimensions: 46″ high x 44″ wide
• Easy filter replacement without a plumber.
• Replace the main tanks every 400,000 gallons (typical family of 4 will consume that amount in 4-6 years). You may consider adding a meter to your system at the time of installation. 
• Sediment pre-filters should be replaced as needed. See installation instructions for more information on how to know when to replace your pre-filters.

What Makes this Whole House Filter so Special

• Removes 90%+ of Chloramines from every water outlet in your home.
• Enjoy a clean, pure, chlorine and chloramine-free shower and bath experience for softer hair and skin with less irritation.
• Provides cleaner air in your bath and home by reducing harmful VOC’s released into the air during hot showers and baths.
• Eliminates chloramine, chlorine and other contaminants in your kitchen for better tasting food and beverages.
• Three Year Warranty – click here to read.
• Third party tested and certified by NSF (NSF is the gold standard for testing) so you can be sure you’re getting the cleanest water. 

Why NSF Certifications are Important

If you are evaluating other whole house Chloramine water filter systems, be sure to ask if the filters have NSF 42 certification for reduction of Chloramine, not just Chlorine. Also, ask for a copy of the test report. The report will show you what percentage of the contaminant the filter removes during the expected life of the filter. Get and read the NSF test report here.

Note: It is important to check with your local water company to find out whether they use Chloramines or Free Chlorine as their primary water disinfectant. You can do this simply by searching for your town’s water quality report online. The report should tell you the primary disinfectant in use in your water supply.

Need help to determine if your water department uses chlorine or chloramines as a water disinfectant? Contact us and we’ll do the work for you at no cost.

This system is designed to remove Chloramines from your water. If your water company uses Free Chlorine as their primary disinfectant then you do not need a Chloramine filter but can instead select the regular Austin Spring Whole House Filter which is designed to remove Chlorine. 

A carbon-based whole house filter is not a replacement for a drinking water filter – Learn why

At Pure Living Space we believe an NSF certified carbon-based Whole House Water Filter is a great way to improve the overall quality and safety of the water coming into your home, but we do not believe it should be considered as a replacement for or alternative to a drinking water filter.

Why? Because carbon-based whole house/POE filters are designed with high flow rates (7.0 Gallons Per Minute) so as not to diminish your water pressure or supply. And, since the water passes through the carbon filter so quickly, it is not as effective at removing all of the potential contaminants as a dedicated drinking water filter.

So, we strongly recommend using some form of drinking water filter along with your whole house filter.

Read our blog post about “Three Things You Should Know About Whole House Water Filters”.

Third-Party Test Results

Tested by a Third-Party Lab

This filter was tested by a certified lab. Read the Test Results for the Austin Springs Chloramines Whole House Water Filter System here.

Return Policy

Return Policy:

If not satisfied, return the filter in the original packaging within 30 days of receipt for a full refund less return shipping costs.

Shipping

Shipping Information:

Ships FREE via UPS and typically arrives in 3-6 business days. Allow 1-2 business days lead time. 

Have more questions? Call us at 1-800-221-5109 or email us.